About Lawn Mower Starter: Tips for Starting and Maintenance

lawn mower starter cord

Grass in your lawn will grow higher and taller. To keep your lawn beautiful and tidy, you need Lawn Mower Starter. The mower starter for lawn is pretty easy to use. You will need to turn it on and walk around your lawn to mow the grass. However, before start mowing, you should check your starter for lawn mower, whether it can run well or not.

Check the Lawn Mower Parts

The first thing to check on your Lawn Mower Starter is battery. Make sure that the battery has previously been charged before you use. Use a 6 amp battery charger. If you have a riding field mower starter, make sure that the battery is 12-volt when it is fully-charged. Use voltmeter to measure it. If it is between 12.7 to 12.9 volts after charging, then you still can use it. However, if voltmeter shows 12.4 volt or less, you should replace the battery.

murray lawn mower starter solenoid

The next thing to check on your Lawn Mower Starter is starter motor. It is bolted to the engine crankcase. Then, it will turn the engine flywheel teeth and directly stars the engine of the riding lawnmower. Commonly, it will work well after you make sure that the battery, electrical connectors and starter and wiring solenoid are tested and proven that they all properly work. This element can be rebuilt with helping hands from a professional.

Also Read Article : Choose the Best Lawn Mower Seats for the Comfortable Lawn Mowing

How to Start a Lawn Mower

To start your Lawn Mower Starter, you should follow some steps. The first thing to do is filling up then checking the oil. Next, you should push the prime button for 3 or 4 times. If your field mower starter is not equipped with a prime button, you can open the throttle. It will activate the choke. The third step is checking the spark plug. It is the thing that makes the motor running. You should ensure that it is attached to the spark plug firmly.

lawn mower key start

Then, as you are starting the Lawn Mower Starter, make sure that the mower is stable. You can hold a safety switch on when you start. Hold the starter handle and pull it upward. Do it firmly and quickly. Soon, you can work with your mower starter for lawn. If it doesn’t work, read the manual book and find out the solution from it.

How to Maintain a Lawn Mower

As you are mowing your lawn, you may find some problem. For some cases, you can overcome yourself. For instance, your Lawn Mower Starter doesn’t start. The first thing to do is checking the gasoline. Replace your old gasoline with the new one. Then, as you finish mowing, you have to drain the gasoline. Make sure that the gasoline is fresh as you will mow in the spring. Do the same step for the oil. If the oil is contaminated or old, drain and replace it soon. The other part of starter for lawn mower to pay attention is the undercarriage. Make sure that it is clean. Use a wire brush it remove the dirt and grass clippings. Use also hose to spray away the remaining debris. For the safety, unplug the spark plug before you work on the undercarriage.